macmaster24
May 4, 10:47 PM
First off, calm down.
Secondly, do you have anything on the HDD that you need backed up?
If you do not, just put in your original discs that came with the computer and hold down the C key while starting up to boot off the disc. Then, use Disk Utility once the Installer loads to format your HDD and reinstall your OS.
ok im calm
and yes i have a paper due tm
and i would put in the disks if the screen changed from something other than the gray apple screen
Secondly, do you have anything on the HDD that you need backed up?
If you do not, just put in your original discs that came with the computer and hold down the C key while starting up to boot off the disc. Then, use Disk Utility once the Installer loads to format your HDD and reinstall your OS.
ok im calm
and yes i have a paper due tm
and i would put in the disks if the screen changed from something other than the gray apple screen
mrapplegate
Apr 11, 12:01 PM
Yup, I tried fixing the permissions, says the group was 0 instead of 80. After that and I reboot same thing :mad:
During a verbose boot does it hang on the same thing each time?
During a verbose boot does it hang on the same thing each time?
will0407
Apr 30, 03:57 PM
I think I'm going to take it in and see if they'll switch it. Only problem is taking my palmguard off and whther it will reapply as well. I got it on perfectly as well on this one! It has warranty until November so I may leave it for a bit or wait until I have a little more time available.
Maybe if they see that i clearly cherish this little thing they may feel more inclined to help me out
Maybe if they see that i clearly cherish this little thing they may feel more inclined to help me out
saabmp3
Jul 6, 10:06 PM
Originally posted by robotrenegade
OH MY GOD!!!! OK this only took 2 days to figure out.
My cable company (ssshhh Adelphia) does this thing called *Hardware Capture* which means the first computer to use the IP address in the only one that can. It saves the hardware code from your computer so it knows when it should and shouldn't ping it. Well i found this out and this is what i did.
1: I told them that I wanted to change my main computer to another, when I did that I hooked it up to the airport. And everything worked.
That hardware code that your talking about is the MAC address which is a method of regulating which computers are allowed to connect to their cable modem. As somebody else said, I'm surprised they let you switch it to a router, what you usually have to do is change the MAC address on the basestation to the address of what you had hooked up orginally.
BEN
OH MY GOD!!!! OK this only took 2 days to figure out.
My cable company (ssshhh Adelphia) does this thing called *Hardware Capture* which means the first computer to use the IP address in the only one that can. It saves the hardware code from your computer so it knows when it should and shouldn't ping it. Well i found this out and this is what i did.
1: I told them that I wanted to change my main computer to another, when I did that I hooked it up to the airport. And everything worked.
That hardware code that your talking about is the MAC address which is a method of regulating which computers are allowed to connect to their cable modem. As somebody else said, I'm surprised they let you switch it to a router, what you usually have to do is change the MAC address on the basestation to the address of what you had hooked up orginally.
BEN
more...
themacmaestro
Dec 9, 09:15 AM
anything left?
garzy
Apr 26, 10:36 PM
Originally posted by bfj
... I stopped by WalMart, and bought one of the 499 HP bundles...
more...
Ryan Giggs | Injury
Ryan Giggs 20* not out
more...
Ryan Joseph Giggs OBE(born 29
Ryan Giggs Man Utd | Giggs
more...
Ryan Giggs is called #39;Sir
Torn Between Ryan Giggs and
more...
Forever Young: Ryan Giggs hits
title Ryan Giggs was back
more...
Ryan Giggs Nets 150th Goal for
Ryan Giggs was left out of a
more...
Ryan Giggs has made his first
... I stopped by WalMart, and bought one of the 499 HP bundles...
more...
daryliow
Jun 22, 01:53 PM
What do you reckon the stock levels will be? 10 maybe? Five 16gb and five 32gb?
navt
May 1, 03:42 PM
DaisyDisk seems to give a good indication of where all those missing GBs are going.
more...
olternaut
Jan 14, 12:22 PM
I'll try but I'll be on MacRumours by half 5, and then I'll watch the video on Wednesday probably.
What the hell?? Wednesday? Aren't they going to post the video tuesday night?????/ :confused:
What the hell?? Wednesday? Aren't they going to post the video tuesday night?????/ :confused:
DavidLeblond
Dec 22, 02:48 PM
I wonder when macminipaperweight will come out :D
That's my best design so far :o I saw this guy on techtv who happened to take 8 plasma displays (his work gave them to him for free) and a mac mini to make virtual windows in his house. Pretty awesome concept. Having guests around, hearing them say "woh... your neighbourhood is beautiful", when really you live in apartment up against a brick wall :p
It would be neat to mod that somehow with Sims 2. Make it feel like you're "in the game." Then again, your guests may start to think that you "have no life." ;)
That's my best design so far :o I saw this guy on techtv who happened to take 8 plasma displays (his work gave them to him for free) and a mac mini to make virtual windows in his house. Pretty awesome concept. Having guests around, hearing them say "woh... your neighbourhood is beautiful", when really you live in apartment up against a brick wall :p
It would be neat to mod that somehow with Sims 2. Make it feel like you're "in the game." Then again, your guests may start to think that you "have no life." ;)
more...
LethalWolfe
Jul 22, 01:01 AM
I've never cut w/iMovie or FCE and I've never captured using the "scene" or "start/stop" detection that it seems like every iMovie user does. But a short trip the FCE discussion forum on Apple.com taught me this:
FCE will mark the start/stop points in the tape after you capture it where as iMovie does it while you are capturing. So, Freg3000, capture 10 or 15 minutes of footage from the camera and then drop that clip onto the timeline. Then go to Mark-->DV Start/Stop Detection and FCE will mark each start/stop in the clip. Then just create sub-clips and place those sub-clips into whatever bins you have created in the browser.
Lethal
FCE will mark the start/stop points in the tape after you capture it where as iMovie does it while you are capturing. So, Freg3000, capture 10 or 15 minutes of footage from the camera and then drop that clip onto the timeline. Then go to Mark-->DV Start/Stop Detection and FCE will mark each start/stop in the clip. Then just create sub-clips and place those sub-clips into whatever bins you have created in the browser.
Lethal
Littleodie914
Jan 11, 09:24 AM
Hi,
I'm trying to install 10.3 on an old Tangerine G3 333 iMac. I've upgraded the RAM and the OS9 that was already instlalled was running fine. I then swapped out the HD booted off of the 10.3 install CD, erased HD and partitioned it to 7GB/33GB.
So far so good. I start the install and everything seems to be going just fine, but it never ask for the 2nd install CD. It goes through disk optimization and everything while still on the 1st CD. Then it reboots itself, but fails to find the OS on the HD and ends up wanting to install again.
I've done this 4 or 5 times now and can't figure out what is happening. Anyone have any ideas?
Thanks.Hmm... After it's done with the first CD, and it's rebooting, the CD is still in there, right? I believe that the mac continues to boot off the first CD until the second is needed. The HD isn't booted from until the installation has finished. Once it's done with the first CD, and restarts, try holding down the "C" key to ensure it doesn't try and boot from the HD.
I'm trying to install 10.3 on an old Tangerine G3 333 iMac. I've upgraded the RAM and the OS9 that was already instlalled was running fine. I then swapped out the HD booted off of the 10.3 install CD, erased HD and partitioned it to 7GB/33GB.
So far so good. I start the install and everything seems to be going just fine, but it never ask for the 2nd install CD. It goes through disk optimization and everything while still on the 1st CD. Then it reboots itself, but fails to find the OS on the HD and ends up wanting to install again.
I've done this 4 or 5 times now and can't figure out what is happening. Anyone have any ideas?
Thanks.Hmm... After it's done with the first CD, and it's rebooting, the CD is still in there, right? I believe that the mac continues to boot off the first CD until the second is needed. The HD isn't booted from until the installation has finished. Once it's done with the first CD, and restarts, try holding down the "C" key to ensure it doesn't try and boot from the HD.
more...
R94N
Oct 25, 12:35 PM
They look great all lit up. I've tried to draw the Apple logo in the past and I find it hard, never mind to actually carve it into something (it could be just my crappy drawing though :D).
Fubar1977
Feb 21, 06:03 AM
Better hope he actually gets to see whatever he has built in its place.
more...
PaRaGoNViCtiM
Dec 14, 03:25 PM
I'll take it!
PM sent.
PM sent.
nec207
Apr 15, 03:26 AM
I'm trying to fix 5 year old Macbook for some one .The problem is hard-drive space used up but the person has very little pictures ,music and work on the computer.
Some how only 7GB free of the 80GB hard-drive.
There is a similar thread http://forums.macrumors.com/showthread.php?t=672477
Thread never got resolved.
well normally when I'm trying fix the same problem on PC running windows it is do to.
1.Bad sector
2.swap file /page file
3.hidden OS system support files
4.malware
5.windows files to keep OS running and windows needs lots of files and I mean lots, lots and lots of files!!!
But do not have that much experience here. What could the problem be.
Some how only 7GB free of the 80GB hard-drive.
There is a similar thread http://forums.macrumors.com/showthread.php?t=672477
Thread never got resolved.
well normally when I'm trying fix the same problem on PC running windows it is do to.
1.Bad sector
2.swap file /page file
3.hidden OS system support files
4.malware
5.windows files to keep OS running and windows needs lots of files and I mean lots, lots and lots of files!!!
But do not have that much experience here. What could the problem be.
more...
andymac85
Mar 5, 04:18 PM
Last login: Mon Mar 5 17:15:25 on ttyp1
Welcome to Darwin!
Andys-Computer:~ Andy$ work
-bash: work: command not found
Andys-Computer:~ Andy$ help
GNU bash, version 2.05b.0(1)-release (powerpc-apple-darwin7.0)
These shell commands are defined internally. Type `help' to see this list.
Type `help name' to find out more about the function `name'.
Use `info bash' to find out more about the shell in general.
Use `man -k' or `info' to find out more about commands not in this list.
A star (*) next to a name means that the command is disabled.
Ryan Giggs
Ryan Giggs has signed a
Welcome to Darwin!
Andys-Computer:~ Andy$ work
-bash: work: command not found
Andys-Computer:~ Andy$ help
GNU bash, version 2.05b.0(1)-release (powerpc-apple-darwin7.0)
These shell commands are defined internally. Type `help' to see this list.
Type `help name' to find out more about the function `name'.
Use `info bash' to find out more about the shell in general.
Use `man -k' or `info' to find out more about commands not in this list.
A star (*) next to a name means that the command is disabled.
Chone
Apr 15, 09:23 PM
I think we'll see differences in capabilities, the 360 has a great general purpose processor with 3 cores and great graphics card, the PS3 has a good graphics card but the processor is what it shines.
360 games might look better but its possible PS3 games might have more stuff going on and or better physic models at the expense of lower resolutions and possibly less shader intensive graphic effects.
I mean really the hardware in these two is completely different and cell is quite an specialized architecture.
Maybe we should have this argument 2 years from now, right now X360 and PS3 have exact graphics (the difference is neglible unless looking hard for it side by side).
In any case, any console purchase should be based on what games it can run not console's performance.
360 games might look better but its possible PS3 games might have more stuff going on and or better physic models at the expense of lower resolutions and possibly less shader intensive graphic effects.
I mean really the hardware in these two is completely different and cell is quite an specialized architecture.
Maybe we should have this argument 2 years from now, right now X360 and PS3 have exact graphics (the difference is neglible unless looking hard for it side by side).
In any case, any console purchase should be based on what games it can run not console's performance.
ProfDrSilver
Oct 20, 10:48 PM
15K PPD? Would you care to explain? With the new version of VMware 3.0 I can get it to do 8000 to 9000PPD on two 4 Core instances....
gkarris
Feb 17, 08:52 PM
http://en.wikipedia.org/wiki/Jackling_House
There you go
I remember now - saw it in a documentary about So Cal homes and Steve wanting to tear this down.
Ugly anyways and I think he did them a favor...
There you go
I remember now - saw it in a documentary about So Cal homes and Steve wanting to tear this down.
Ugly anyways and I think he did them a favor...
itcheroni
Sep 12, 12:54 AM
Hey kntgsp where's the dock and manual? Correct me if I'm wrong but don't these things come with that stuff? Oh, and you never got back to me about whether you had a receipt or not. Thanks in advance.
TalonFlyer
Jul 2, 10:14 AM
I updated Safari 5 before I updated to 10.6.4. I did not see this issue when updating in this order.
jane doe
Apr 16, 08:51 AM
The Xbox doesn't upscale DVDs over component. Here's a good FAQ on the issue, http://forum.teamxbox.com/showthread.php?t=477767 . I does do it over VGA, though.
I don't know how accurate this is, I'm not saying that its upscaling the DVDs but I am getting 1080p thru component. My TV will show me the resolution at the press of a button and when it changes. The Xbox is 1080p and when I place a DVD in the drive and play it, it does not (any longer) change down to 480p.
I don't know how accurate this is, I'm not saying that its upscaling the DVDs but I am getting 1080p thru component. My TV will show me the resolution at the press of a button and when it changes. The Xbox is 1080p and when I place a DVD in the drive and play it, it does not (any longer) change down to 480p.
AHDuke99
Jun 20, 10:07 PM
cause they ban innocent victims :D
poor iccy :(
poor iccy :(
No comments:
Post a Comment