chrono1081
Apr 12, 09:30 AM
Corona SDK could do it pretty easily. You'll want to watch tutorials from them at this site: http://www.learningCorona.com to make sure they cover what you want.
chrismacguy
Apr 10, 08:09 PM
i've got one for you, but mine is version '9.0.4' instead of '9.2.2' like the link above. also have the matching 'Software Restore' disc, and an 'iMac Applications' disc also stamped but looks to be later as it's a lighter shade of gray. i know that i used the disc to install 9.0.4 on a b&w g3, so this should work for you.
i've no use for them, if you want them, pm you mailing address and i'll slap a couple stamps on them and send them on. best of luck with the restore project.
Those should suit the OP fine, since 9.1, 9.2, 9.2.1 and 9.2.2 are all free downloads from Apple (And the 9.0.4 Disc would also probably work to some degree on early Slot-Loading iMacs (Up to and including Summer 2000) as well should the OP happen across any of those). The iMac Applications disc will be for 9.2.2 and X, however may work (It should have iMovie 2 for OS 9 on it if its the same disc I have - mine is from a G4/700 15" iMac, dated 2002 with iLife 3 for X and iMovie 2 for OS 9 on it), but it probably shipped with a G4 iMac, and if it has iDVD on it, that wont work (as well as all the X-Gubbins on those discs).
i've no use for them, if you want them, pm you mailing address and i'll slap a couple stamps on them and send them on. best of luck with the restore project.
Those should suit the OP fine, since 9.1, 9.2, 9.2.1 and 9.2.2 are all free downloads from Apple (And the 9.0.4 Disc would also probably work to some degree on early Slot-Loading iMacs (Up to and including Summer 2000) as well should the OP happen across any of those). The iMac Applications disc will be for 9.2.2 and X, however may work (It should have iMovie 2 for OS 9 on it if its the same disc I have - mine is from a G4/700 15" iMac, dated 2002 with iLife 3 for X and iMovie 2 for OS 9 on it), but it probably shipped with a G4 iMac, and if it has iDVD on it, that wont work (as well as all the X-Gubbins on those discs).
adbe
Jul 23, 12:20 PM
Anyword on the "rumored" marble interface that was reported awhile back?
Seconded. I currently do all my development in VS 2008 then port to XCode and Linux at compilation time. I'd like to switch to XCode for development, but I just prefer VS2008. I'm eager to see if XCode 4 will suit my needs better than where the Express version at least has been irritating me already. I prefer all in one displays for IDEs, and XCode 3's interpretation of AIO is a mess IMHO.
Seconded. I currently do all my development in VS 2008 then port to XCode and Linux at compilation time. I'd like to switch to XCode for development, but I just prefer VS2008. I'm eager to see if XCode 4 will suit my needs better than where the Express version at least has been irritating me already. I prefer all in one displays for IDEs, and XCode 3's interpretation of AIO is a mess IMHO.
treyjustice
May 1, 05:48 PM
if you get a google voice number (FREE) and download that app on your ipad you can use that number to text.
I have google voice on my iphone and ipad and use it to text because it is 100% free!
I have google voice on my iphone and ipad and use it to text because it is 100% free!
more...
Nnavick
Apr 24, 06:50 AM
UIView *newView = loginRegisterViewController.abc;
It's shows me blank view
what is the problem?
It's shows me blank view
what is the problem?
AndyOrr
Apr 11, 06:52 AM
Gradients are still in, right (as asked in Doc. Brown voice)?
more...
trainguy77
Nov 16, 04:55 PM
Dreadnought even though i have lost a couple WU so far with the beta I am still completing some work units that are worth as much as 1700 points each. :eek: And it takes less then 24 hours to do one of those suckers. Less then 100 days to get into the top 100......I am coming.....
kinson7
Apr 28, 10:09 PM
I don't sync the contacts via iTunes anymore. There is some sync issue with the contacts that I couldn't solve, so we went to put his contacts in the cloud instead.
The issue is that despite the (exchange) contacts being synced over-the-air, when you save a contact in the iphone via the dialer/recent-calls, it goes into the iPhone's local contact list by default, instead of into the exchange group. :/
The issue is that despite the (exchange) contacts being synced over-the-air, when you save a contact in the iphone via the dialer/recent-calls, it goes into the iPhone's local contact list by default, instead of into the exchange group. :/
more...
wordoflife
Apr 23, 10:22 AM
I didn't read anything about low volume in the reviews, but here are these
http://www.newegg.com/Product/Product.aspx?Item=N82E16875205249
http://www.newegg.com/Product/Product.aspx?Item=N82E16875176277
I don't think that these will need a data plan, but I'm not entirely sure (especially on the first one). But they are probably more expensive than you were originally looking to spend.
http://www.newegg.com/Product/Product.aspx?Item=N82E16875205249
http://www.newegg.com/Product/Product.aspx?Item=N82E16875176277
I don't think that these will need a data plan, but I'm not entirely sure (especially on the first one). But they are probably more expensive than you were originally looking to spend.
quagmire
Jul 19, 03:54 PM
Analogy withstanding, he does have a point. The Yankees have ignored Torre as part of their legacy ever since their nasty parting back in 2007.
The Yankees are doing the same with in regards to the Old Stadium.
The Yankees are doing the same with in regards to the Old Stadium.
more...
dmr727
Aug 24, 07:39 PM
Dunno how rare it is, but it's definitely pimp! Nice! :)
DavidLeblond
Dec 22, 02:11 PM
Has anyone seen this? Its a page from Apple's Mac Mini site. Has some fun stuff on it. (A Mac Mini robot, a self driving car running from 3 mac minis etc)
http://www.apple.com/macmini/bigideas.html
http://www.apple.com/macmini/bigideas.html
more...
Daedalus256
Dec 16, 12:04 PM
has a deal been reached about the powerbook g3
not yet but I havent talked to macgenius yet either.
not yet but I havent talked to macgenius yet either.
lyzardking
Apr 19, 10:50 AM
I started folding after I found out a loved one was diagnosed with Parkinson's Disease.
more...
jefhatfield
Oct 18, 08:18 AM
...and the last time he posted was in april!!!
it looks like i will prolly fall out of the top ten next year sometime since i can't post as much as the teenagers:p
it looks like i will prolly fall out of the top ten next year sometime since i can't post as much as the teenagers:p
Daveway
Jan 9, 08:34 PM
I have every confidence Firefox will not go down the same path IE has gone down.
more...
mad jew
Nov 25, 05:08 PM
Well, you've got me after Christmas unless I go to Kenya but I'm pretty busy until then. I doubt I'll be very helpful but I can go through and change all the rumors to rumours. ;)
There seems to be something a bit lacking in the guides though and I can't put my finger on it. I think it might be the integration with the forums but I don't know how this could really be improved. All up they're very impressive so far though. Maybe we just need to start linking to them from threads more or something.
I reckon in time they'll be more than comprehensive enough.
There seems to be something a bit lacking in the guides though and I can't put my finger on it. I think it might be the integration with the forums but I don't know how this could really be improved. All up they're very impressive so far though. Maybe we just need to start linking to them from threads more or something.
I reckon in time they'll be more than comprehensive enough.
GeekOFComedy
Dec 25, 01:49 AM
Couldn't live without this!
prady16
Sep 28, 06:16 PM
Now, what is the only thing that needs an update? ;)
ZicklePop
Aug 17, 02:01 PM
Hey can you guys tell me what I need to change to become valid html?
Result: Tentatively passed validation
File: test.html
Encoding: utf-8
Doctype: -//W3C//DTD HTML 4.01 TRANSITIONAL//EN
Unknown Parse Mode!
The MIME Media Type (text/html) for this document is used to serve both SGML and XML based documents, and it is not possible to disambiguate it based on the DOCTYPE Declaration in your document. Parsing will continue in SGML mode.
No DOCTYPE found!
Attempting validation with HTML 4.01 Transitional.
The DOCTYPE Declaration was not recognized or is missing. This probably means that the Formal Public Identifier contains a spelling error, or that the Declaration is not using correct syntax. Validation has been performed using a default "fallback" Document Type Definition that closely resembles "HTML 4.01 Transitional", but the document will not be Valid until you have corrected this problem with the DOCTYPE Declaration.
This Page Is Tentatively Valid -//W3C//DTD HTML 4.01 TRANSITIONAL//EN
The uploaded document "test.html" was checked and found to be tentatively valid -//W3C//DTD HTML 4.01 TRANSITIONAL//EN. This means that with the use of some fallback or override mechanism, we successfully performed a formal validation using an SGML or XML Parser. In other words, the document would validate as -//W3C//DTD HTML 4.01 TRANSITIONAL//EN if you changed the markup to match the changes we have performed automatically, but it will not be valid until you make these changes
The code I have for this so far is:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 TRANSITIONAL//EN">
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
What else do I need to become valid?
Result: Tentatively passed validation
File: test.html
Encoding: utf-8
Doctype: -//W3C//DTD HTML 4.01 TRANSITIONAL//EN
Unknown Parse Mode!
The MIME Media Type (text/html) for this document is used to serve both SGML and XML based documents, and it is not possible to disambiguate it based on the DOCTYPE Declaration in your document. Parsing will continue in SGML mode.
No DOCTYPE found!
Attempting validation with HTML 4.01 Transitional.
The DOCTYPE Declaration was not recognized or is missing. This probably means that the Formal Public Identifier contains a spelling error, or that the Declaration is not using correct syntax. Validation has been performed using a default "fallback" Document Type Definition that closely resembles "HTML 4.01 Transitional", but the document will not be Valid until you have corrected this problem with the DOCTYPE Declaration.
This Page Is Tentatively Valid -//W3C//DTD HTML 4.01 TRANSITIONAL//EN
The uploaded document "test.html" was checked and found to be tentatively valid -//W3C//DTD HTML 4.01 TRANSITIONAL//EN. This means that with the use of some fallback or override mechanism, we successfully performed a formal validation using an SGML or XML Parser. In other words, the document would validate as -//W3C//DTD HTML 4.01 TRANSITIONAL//EN if you changed the markup to match the changes we have performed automatically, but it will not be valid until you make these changes
The code I have for this so far is:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 TRANSITIONAL//EN">
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
What else do I need to become valid?
LouisBlack
Apr 14, 05:40 AM
Talk to Apple. This looks like the infamous Nvidia 8600M issue and may still be covered under Apple's replacement scheme (I actually got a brand new MBP out of them about 6 months out of warranty).
Make an appointment at your local genius bar and see what they say.
The 8600M only appeared in the Macbook Pro and I believe only the 08 model. The OP says his computer is a Macbook and from early 2007 so will be using the Intel 950 integrated graphics.
Make an appointment at your local genius bar and see what they say.
The 8600M only appeared in the Macbook Pro and I believe only the 08 model. The OP says his computer is a Macbook and from early 2007 so will be using the Intel 950 integrated graphics.
TheMacBookPro
Apr 30, 10:30 AM
I was wondering if anyone else has seen this issue while running Windows 7 from boot camp: My internal speakers don't work - but all sounds work perfectly if I plug in a pair of headphones. I've read about a lot of cases where Windows 7 still assumes a pair of headphones have been plugged in with other Macs and that 'jiggling' the headphones resolves the issue, but that's not my problem. Windows 7 reports - correctly - that headphones are NOT plugged in, yet still no sound through my speakers.
To make it even more frustrating, my speakers were working for the first few boots into Windows 7, but now I can't get a single sound. I've tried reloading all the latest bootcamp drivers, installing other sound drivers (Realtek and Cirrus) with no results. I don't boot into Win 7 often, but it would be nice to have sound. It's these kind of issues that do NOT make me miss the Win experience. :)
Anyone else with this experience? I can't find anything that reports this problem with other MBAs. I'm running a 13" ultimate, but was curious to see if any other Late 2010 MBA owners were running into the same issue.
Thanks for sharing any similar experiences!
Just fyi- never had this problem with any of my Windows based desktops/laptops and my Macs with W7 installed. It isn't a common problem with Windows.
That said- make sure you've updated to the latest version of Boot Camp, updated all the software updates available, and enabled the speakers as an output device (Control Panel\Hardware and Sound, then click Sound, then right click Speakers and click enable if it's disabled). Try the Configure option to test sound output in that menu too.
To make it even more frustrating, my speakers were working for the first few boots into Windows 7, but now I can't get a single sound. I've tried reloading all the latest bootcamp drivers, installing other sound drivers (Realtek and Cirrus) with no results. I don't boot into Win 7 often, but it would be nice to have sound. It's these kind of issues that do NOT make me miss the Win experience. :)
Anyone else with this experience? I can't find anything that reports this problem with other MBAs. I'm running a 13" ultimate, but was curious to see if any other Late 2010 MBA owners were running into the same issue.
Thanks for sharing any similar experiences!
Just fyi- never had this problem with any of my Windows based desktops/laptops and my Macs with W7 installed. It isn't a common problem with Windows.
That said- make sure you've updated to the latest version of Boot Camp, updated all the software updates available, and enabled the speakers as an output device (Control Panel\Hardware and Sound, then click Sound, then right click Speakers and click enable if it's disabled). Try the Configure option to test sound output in that menu too.
hopejr
Apr 26, 02:03 AM
Theoretically they should have been removed today. If they are still coming up for you, please post here.
sorry for the trouble,
arn
Just letting you know, those ads are still coming up. It has been 2 weeks now.
sorry for the trouble,
arn
Just letting you know, those ads are still coming up. It has been 2 weeks now.
clayj
Jan 24, 09:05 PM
i use a microsoft wireless g router
does the trick
was really cheapI endorse this router, as well... I have an MN-700 wireless router and 2 MN-100 wired routers (connected to the MN-700), and they're very solid. Plus, you can get the MN-700 from Overstock.com for only $39.95.
The only caveat I know of is that you MIGHT need a Windows box in order to run the configuration software... I have my Mac mini connected through my MN-700, but I handle all of the router configuration on one of my Windows PCs.
does the trick
was really cheapI endorse this router, as well... I have an MN-700 wireless router and 2 MN-100 wired routers (connected to the MN-700), and they're very solid. Plus, you can get the MN-700 from Overstock.com for only $39.95.
The only caveat I know of is that you MIGHT need a Windows box in order to run the configuration software... I have my Mac mini connected through my MN-700, but I handle all of the router configuration on one of my Windows PCs.
No comments:
Post a Comment