Jazwire
May 4, 12:26 AM
There is a minor difference - the new iMacs have an ambient light sensor which will provide ideal brightness whether you are in a dark or well-lit environment.
If you manually set the brightness, does it return? Perhaps the display was set too bright/dim for the conditions?
From Apple's site: "To conserve power and relieve eyestrain, a built-in ambient light sensor automatically adjusts the screen brightness on MacBook, MacBook Pro and iMac to suit the ambient light of whatever room you�re in."
Very Possible, thats your answer there...
If you manually set the brightness, does it return? Perhaps the display was set too bright/dim for the conditions?
From Apple's site: "To conserve power and relieve eyestrain, a built-in ambient light sensor automatically adjusts the screen brightness on MacBook, MacBook Pro and iMac to suit the ambient light of whatever room you�re in."
Very Possible, thats your answer there...
AlaskaMoose
Mar 5, 12:48 AM
I am too new at CS5 to be of much help, but I wonder if this would be of any help to you (?):
a. Take a good quality RAW photo of the picture, and open this RAW image in Camera Raw as a Smart Object. See if you can adjust the area that is too light (left of the photo).
b. Now, double-click on the image shown in the Layers panel, which in turn will open a layer of the image in Camera Raw. Now adjust the dark side of the image, and then click on "Done." The result is two layers blended into one.
-------------
a. Take a good quality RAW photo of the picture, and open this RAW image in Camera Raw as a Smart Object. See if you can adjust the area that is too light (left of the photo).
b. Now, double-click on the image shown in the Layers panel, which in turn will open a layer of the image in Camera Raw. Now adjust the dark side of the image, and then click on "Done." The result is two layers blended into one.
-------------
njaremka
Apr 7, 07:45 AM
how small do your fingers need to be to use the mute switch?!? "THAT'S" why i dont like bumpers and cases.
greenmymac
Oct 25, 09:21 PM
How ironic...a month after I LEFT Tulsa they open an Apple store *slaps forehead*
Will b there
!
Will b there
!
more...
xStep
Apr 4, 07:12 PM
rustywild sent me a private message and this is my response to that.
I only slept 4 hours last night so I might still be misunderstanding. Part of your explanation didn't make any sense given your code.
This is what I believe you have�
A dictionary where the keys will be the left most component that sets up what the right side component should display. The keys are placed into a sorted array. Each time component 0 changes, you want to update the right side component. Each time a choice is made, you want it reflected in two labels. The following code should do that for you. This is untested code.
- (void)pickerView:(UIPickerView *)pickerView didSelectRow:(NSInteger)row inComponent:(NSInteger)component
{
if (component == kPotenciaComponent) {
NSString *selectedState = [self.potencia objectAtIndex:row];
// Update values array for key of component 0.
[self.cantidad release];
self.cantidad = [potenciavoltaje objectForKey:selectedState];
[pickerView reloadAllComponents]; // Might not need to load all, but I do.
[pickerView selectRow: row inComponent: kPotenciaComponent animated: YES];
[pickerView selectRow: 0 inComponent: kCantidadComponent animated: YES];
label1.text = [self.potencia objectAtIndex:row];
label2.text = [self.cantidad objectAtIndex: 0];
}
else {
label2.text = [self.cantidad objectAtIndex: row];
}
}
The labels are updated here because that is when the change is occurring in your selection. You may also want to set them when you first setup your two data arrays in your viewDidLoad method.
P.S. Looks like you are a native Spanish speaker. Welcome to the challenge of communicating technical problems in another language. :)
I only slept 4 hours last night so I might still be misunderstanding. Part of your explanation didn't make any sense given your code.
This is what I believe you have�
A dictionary where the keys will be the left most component that sets up what the right side component should display. The keys are placed into a sorted array. Each time component 0 changes, you want to update the right side component. Each time a choice is made, you want it reflected in two labels. The following code should do that for you. This is untested code.
- (void)pickerView:(UIPickerView *)pickerView didSelectRow:(NSInteger)row inComponent:(NSInteger)component
{
if (component == kPotenciaComponent) {
NSString *selectedState = [self.potencia objectAtIndex:row];
// Update values array for key of component 0.
[self.cantidad release];
self.cantidad = [potenciavoltaje objectForKey:selectedState];
[pickerView reloadAllComponents]; // Might not need to load all, but I do.
[pickerView selectRow: row inComponent: kPotenciaComponent animated: YES];
[pickerView selectRow: 0 inComponent: kCantidadComponent animated: YES];
label1.text = [self.potencia objectAtIndex:row];
label2.text = [self.cantidad objectAtIndex: 0];
}
else {
label2.text = [self.cantidad objectAtIndex: row];
}
}
The labels are updated here because that is when the change is occurring in your selection. You may also want to set them when you first setup your two data arrays in your viewDidLoad method.
P.S. Looks like you are a native Spanish speaker. Welcome to the challenge of communicating technical problems in another language. :)
mikeyg36
Apr 20, 10:30 PM
The only applications that might use this are military applications. Which are most likely classified applications. But in short, no, a normal application wouldn't use it. ;)
more...
Cabbit
Apr 18, 03:37 PM
Its a nice shot but i don't really get a sense of scale, i don't get the feeling for how big the mountain is.
arn
Dec 9, 10:17 PM
Looking for a roll call on people interested in an official MacRumors reader gathering on January 14th (Monday) evening (prob start between 6 and 8). The keynote takes place on Tuesday, Jan 15th.
Time and Location to be determined, but it will be close to Moscone.
Please indicate if you are planning on coming and your age.
Thanks
arn
Time and Location to be determined, but it will be close to Moscone.
Please indicate if you are planning on coming and your age.
Thanks
arn
more...
reberto
Dec 7, 11:02 PM
again, i'm interested in the PC but would have to wait for some christmas cash. as stated in your previous thread i could trade, a powerbook g3, ipod 3G 15GB, or an imac G3 600
let me know if interested...i also have a few obscure un-tech related things for sale if interested....
but as stated in my previous thread, if it was a 400mhz p-book, I would. But it isn't. :(
let me know if interested...i also have a few obscure un-tech related things for sale if interested....
but as stated in my previous thread, if it was a 400mhz p-book, I would. But it isn't. :(
MacsRgr8
Nov 10, 03:17 PM
Cr@p!
Till about a year ago (?) SpyMac was a decent contributor to the Mac-Rumors & Scene world.
What happened?
Did they hire a marketing bloke? Are they so in debt that they have to advertize every inch available on their site????
Jeez! :confused: :mad:
I used to check out their site on a daily basis.
There are a couple of things I do (and did) every morning:
1) Drink coffee
2) Check out MacRumors.com
3) Check out AppleInsider.com
4) Check out ThinkSecret.com
5) Check out SpyMac.com
6) Take a cr@p
Well, delete # 5)
more...
Ludacris – Baby (Rap Mix)
+bieber+aby+ft+ludacris
more...
Ludacris - Baby T.S.D. Remix
Bieber - Baby Ft. Ludacris
more...
Justin Bieber Baby ft.
has Ludacris helping him
more...
Justin Bieber - Baby ft.
Ludacris – Baby
Ludacris – #39;Baby#39;
Till about a year ago (?) SpyMac was a decent contributor to the Mac-Rumors & Scene world.
What happened?
Did they hire a marketing bloke? Are they so in debt that they have to advertize every inch available on their site????
Jeez! :confused: :mad:
I used to check out their site on a daily basis.
There are a couple of things I do (and did) every morning:
1) Drink coffee
2) Check out MacRumors.com
3) Check out AppleInsider.com
4) Check out ThinkSecret.com
5) Check out SpyMac.com
6) Take a cr@p
Well, delete # 5)
more...
tim2006
Apr 15, 12:08 PM
what happened to the final product?
DustinT
Mar 3, 10:13 AM
So, there's no audiophile grade headphone amp inside a MacBook Pro unfortunately. Still, there can be tremendous variation between the quality of the headphone output on a laptop.
What did you think of the sound when you tried your headphones on your MacBook Pro? How about if you connect a pair of high impedance cans?
What did you think of the sound when you tried your headphones on your MacBook Pro? How about if you connect a pair of high impedance cans?
more...
roadbloc
Mar 31, 02:12 PM
Was just wondering if that means it is already featured-locked.
As it is just a Developer Preview (version 2), it is far too early to tell.
As it is just a Developer Preview (version 2), it is far too early to tell.
Mr. Retrofire
Mar 31, 05:21 PM
I hear a lot of confusion about this. I don't know why TechCrunch said what they did, but by all accounts, there is no golden master right now. This is just a developer preview. After this there will (probably) be betas. And after that there will eventually be a golden master or two.
Right. Adobe and other big software manufacturers need at least > 6 months to optimize their software (much more than just InDesign and Photoshop) for the new OS. Apple probably wants to optimize Lion for Sandy Bridge and Ivy Bridge (http://en.wikipedia.org/wiki/Sandy_Bridge#Ivy_Bridge) (via Intels Mac OS X compilers (http://software.intel.com/en-us/articles/intel-software-development-products-for-mac-os-x/), not just via the GCC), which means that we will see Lion GM/RTM in January/February 2012 and Lion final in March/April 2012. This would make more sense, because it reduces additional development costs for Apple, after Ivy Bridge comes out.
Right. Adobe and other big software manufacturers need at least > 6 months to optimize their software (much more than just InDesign and Photoshop) for the new OS. Apple probably wants to optimize Lion for Sandy Bridge and Ivy Bridge (http://en.wikipedia.org/wiki/Sandy_Bridge#Ivy_Bridge) (via Intels Mac OS X compilers (http://software.intel.com/en-us/articles/intel-software-development-products-for-mac-os-x/), not just via the GCC), which means that we will see Lion GM/RTM in January/February 2012 and Lion final in March/April 2012. This would make more sense, because it reduces additional development costs for Apple, after Ivy Bridge comes out.
more...
mharpo
May 3, 11:52 AM
All you have to do is look at "About this Mac" to find out whether it's ddr2 or 3...
cocacolakid
Mar 19, 06:13 PM
I have a 2010 unibody mini hooked up to a 37" Vizio 1080p HDTV as it's main monitor. (I also have a 24" HD monitor as a dual monitor, but I rarely use that).
I have had absolutely no issues at all using a large HDTV. There isn't any lag, the picture is fantastic, etc.
I play a ton of movies on this thing, using Front Row, VLC, and Boxee (and the iPad has apps to use as a remote for all 3).
I'd highly recommend it.
I have had absolutely no issues at all using a large HDTV. There isn't any lag, the picture is fantastic, etc.
I play a ton of movies on this thing, using Front Row, VLC, and Boxee (and the iPad has apps to use as a remote for all 3).
I'd highly recommend it.
more...
OPTiK
Mar 14, 07:51 AM
did u make any "add-ons" i.e OpenSSh, SBSettings ?
Nope.
For some reason, I always get error 3601 whenever I try to restore on iTunes. I can't get it to work!
Looks like a firewall issues, I'd turn off any firewalls you have.
after hours of frustration, i finally got it to restore with a custom .ispw. Noe im trying to figure out the tetheredboot part. Firstly, i don't seem to find the files located in the /dfu...at least not the ones i need, i've got 48 instead of 90. When i turn the ipad on i see cydia, but it crashes upon opening, this is a result of still being not tethered, right? Basically what i'm asking i guess is for some help with the last part of this process.
sn0wbreeze does this for you.. it loads a folder "iBooty" onto your desktop with the tetheredboot app and the necessary files, so all you have to do is open it up and run/follow directions. If cydia doesnt open then that means that the jb isnt active via the tether.
Nope.
For some reason, I always get error 3601 whenever I try to restore on iTunes. I can't get it to work!
Looks like a firewall issues, I'd turn off any firewalls you have.
after hours of frustration, i finally got it to restore with a custom .ispw. Noe im trying to figure out the tetheredboot part. Firstly, i don't seem to find the files located in the /dfu...at least not the ones i need, i've got 48 instead of 90. When i turn the ipad on i see cydia, but it crashes upon opening, this is a result of still being not tethered, right? Basically what i'm asking i guess is for some help with the last part of this process.
sn0wbreeze does this for you.. it loads a folder "iBooty" onto your desktop with the tetheredboot app and the necessary files, so all you have to do is open it up and run/follow directions. If cydia doesnt open then that means that the jb isnt active via the tether.
Intell
Dec 12, 10:31 PM
Force it into DFU Mode (Google it) when it's at the Apple logo, then rerun redsn0w on it.
beatle888
Sep 23, 05:52 PM
Welcome to the family! ;) If you have any questions at all, just ask them here on MacRumors - there are more than enough knowledgeable and friendly people here to help you out no matter what it is you may need. :cool:
did you even bother reading the opening post....hahaha
did you even bother reading the opening post....hahaha
waw74
Apr 30, 12:12 AM
In my second post on this thread, I stated that I just reset the iPad and still have the same problem.
did you restore from backup? settings still get transfered.
i had a 1st gen iPhone that i jail broke, and enabled the emoji keyboard. It's still enabled on my current phone, even though i un-jailbroke the 1st gen, eventually changed to a 3G (used it both jailbroken and not) and changed to a 4 (currently un-jailbroken).
so yes, even though you restored to the stock OS, it can still be affected by having been jailbroken in the past.
you'll probably have to do a clean install, and start all your settings over from scratch.
did you restore from backup? settings still get transfered.
i had a 1st gen iPhone that i jail broke, and enabled the emoji keyboard. It's still enabled on my current phone, even though i un-jailbroke the 1st gen, eventually changed to a 3G (used it both jailbroken and not) and changed to a 4 (currently un-jailbroken).
so yes, even though you restored to the stock OS, it can still be affected by having been jailbroken in the past.
you'll probably have to do a clean install, and start all your settings over from scratch.
VideoNewbie
Nov 29, 04:10 AM
Hey i sent you a PM. pls check it when u get a chance thank u
bump
lucidmedia never answered my pm..
any of his/her friends mind giving him a nudge?
i still need more concrete clarification on whether to trademark or copyright the logo for my company...
(ps i am 18 years old so need to make best decision by research done online dont currently have funds to hire a copyright lawyer to make the decision for me)
bump
lucidmedia never answered my pm..
any of his/her friends mind giving him a nudge?
i still need more concrete clarification on whether to trademark or copyright the logo for my company...
(ps i am 18 years old so need to make best decision by research done online dont currently have funds to hire a copyright lawyer to make the decision for me)
CorvusCamenarum
Jul 23, 12:29 AM
I suppose any evidence of a Strawhenge has long since been destroyed.
xyzzy-xyzzy
Apr 28, 10:50 PM
I got the Dr. Bott mini DisplayPort Extension Pro cable (http://store.apple.com/us/product/H2477ZM/A?fnode=MTY1NDA3Ng&mco=MTg5OTIwMTE&s=topSellers) (2meter). Note, that link is to the Apple site but I didn't buy it there since almost anywhere else is cheaper.
There are others on the market too and other lengths (e.g., Dr. Bott has a 1m cable). The only two "problems" associated with mDP extension cables are (a) they may be hard to find in stock -- Dr. Bott was a problem at the time I went looking for them and (b) if you want to be able to pass audio through the mDP you need to make sure the cable supports that. For example you can find mDP extension cables in a lot of places but not all also support the audio (for example, monoprice (http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10246&cs_id=1024602&p_id=5502&seq=1&format=2)).
There are others on the market too and other lengths (e.g., Dr. Bott has a 1m cable). The only two "problems" associated with mDP extension cables are (a) they may be hard to find in stock -- Dr. Bott was a problem at the time I went looking for them and (b) if you want to be able to pass audio through the mDP you need to make sure the cable supports that. For example you can find mDP extension cables in a lot of places but not all also support the audio (for example, monoprice (http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10246&cs_id=1024602&p_id=5502&seq=1&format=2)).
john_satc
Mar 7, 11:37 AM
Simple question but i am stuck ... how do you password protect a folder? i was able to with MS but duno how now.
No comments:
Post a Comment