decksnap
Aug 16, 11:38 AM
No 1,000,000 on this one. (see my other one) Just for animation category, not 1,000,000 category. Or- if you watch it for long enough, it will rotate 1,000,000 times!!!
Macaroony
Apr 22, 02:56 AM
Amendment 1 - Freedom of Religion, Press, Expression. Ratified 12/15/1791
Congress shall make no law respecting an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or of the press; or the right of the people peaceably to assemble, and to petition the Government for a redress of grievances.
Hello, anybody home?
Congress shall make no law respecting an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or of the press; or the right of the people peaceably to assemble, and to petition the Government for a redress of grievances.
Hello, anybody home?
Chupa Chupa
May 5, 06:18 AM
Any of the new iMacs are more than enough. If you look at the top end card they put in the MBP its the same 6750M in the low end iMac. The only difference is the low end iMac has 1/2 the VRAM.
And that is not to put the MBPs down. The 15"ers will serve you well too. The major factors in my mind are, portability vs. extra speed, and ease of repairs. The iMacs are faster and offer more bang for the buck but if the internal HD dies its a PITA to replace yourself. OTOH the MBPs provide less value but replacing an internal drive is just a screwdriver and torxdriver away.
And that is not to put the MBPs down. The 15"ers will serve you well too. The major factors in my mind are, portability vs. extra speed, and ease of repairs. The iMacs are faster and offer more bang for the buck but if the internal HD dies its a PITA to replace yourself. OTOH the MBPs provide less value but replacing an internal drive is just a screwdriver and torxdriver away.
iJohnHenry
Apr 17, 09:48 AM
This was funny in the first time I saw it.
Yes, but you're old.
Seen it before, too. :p
Yes, but you're old.
Seen it before, too. :p
more...
theSeb
Apr 27, 04:26 PM
Just so you know there are no military applications that benefit from this.
Where is the laugh out loud smiley?
Where is the laugh out loud smiley?
arn
Nov 16, 02:30 PM
can you post a screenshot how this is being obtrusive?
This is how it looks for me
This is how it looks for me
more...
MacRumorUser
Mar 16, 01:08 PM
You need to start your own rental service and recoup some of those gaming funds; you'll probably turn a profit in a week's time with all the games you've been getting lately mate. ;)
I would do, But nobody would rent some of the crap I buy :D :(
I would do, But nobody would rent some of the crap I buy :D :(
aafuss1
Aug 3, 03:37 PM
I'm suprised to see there's still support for the Lumix FZ35 camera's .rw2 RAW files.
I hope Apple adds support this in a future Digital Camera RAW Compatibility Update.
I own that model-and currently have to use Silkypix to work with the RAW files from the camera.
I hope Apple adds support this in a future Digital Camera RAW Compatibility Update.
I own that model-and currently have to use Silkypix to work with the RAW files from the camera.
more...
glocke12
Mar 21, 05:50 AM
I did not know these existed, and actually do not think they are a bad idea if you are the type to take your gear outside in inclement weather.
harpster
Apr 30, 08:38 AM
Mysql is the database language and PHP is the server side programming language that is most commonly used to interface the html form to the database. If you want to learn that just get a book like one of the Visual Quickstart Guides by Larry Ullman for Mysql & PHP. There are many books like this and online tutorials as well. Be prepared to spend some time on this if that's the direction your headed.
You should also get a local server set up on your computer. MAMP for Mac or WAMP for Windows. They are free and give you a easy way to develop dynamic web sites without having a hosting account. Later you can move the site to a live web host.
The other option is to use something like Wordpress where you can host for free and use one of the Form plugin's to make your form and store the results without having to know the code to make it happen.
You should also get a local server set up on your computer. MAMP for Mac or WAMP for Windows. They are free and give you a easy way to develop dynamic web sites without having a hosting account. Later you can move the site to a live web host.
The other option is to use something like Wordpress where you can host for free and use one of the Form plugin's to make your form and store the results without having to know the code to make it happen.
more...
bartelby
Aug 9, 12:52 AM
I couldn't - The file size is too large. :(
(thanks for pointing that out though) I can downsize it and sacrifice its quality to fit the attachments but I can't replace the current one with it - it won't look right.
You could attach a smaller image for the comp. and also have the larger image because it's so bloody good!!
(thanks for pointing that out though) I can downsize it and sacrifice its quality to fit the attachments but I can't replace the current one with it - it won't look right.
You could attach a smaller image for the comp. and also have the larger image because it's so bloody good!!
sbddude
May 4, 07:07 PM
Hello World, my first post on macrumors
I tried searching but most of the information was not in recent time, so figured to post a new thread.
I bought a used 3GS 8GB yesterday from a person. The phone is unlocked and jailbroken.
Here is the relevant information:
Version: 4.3.2 (8H7)
Model: MC640LL
Modem Firmware (baseband, i think): 06.15.00
Currently I am using it with T-Mobile, so I know it is unlocked properly.
My question is....
The phone has apps and settings from the previous user. I want to 'reset' or 'restore' or something like that to remove all settings and content from previous user.
If I go to Settings --> General --> Reset and perform a reset, will my phone still be usable with T-Mobile?
Thank you all. Hope I provided enough info to answer.
you need to restor with custom firmware, because of the 6.15.00 baseband.
then jailbreak and install ultrasnow.
hurry up because 4.3.3 was released and might not be jailbreakable.
if you have SHSH for 4.3.2. or anything earlier, you will be OK.
I tried searching but most of the information was not in recent time, so figured to post a new thread.
I bought a used 3GS 8GB yesterday from a person. The phone is unlocked and jailbroken.
Here is the relevant information:
Version: 4.3.2 (8H7)
Model: MC640LL
Modem Firmware (baseband, i think): 06.15.00
Currently I am using it with T-Mobile, so I know it is unlocked properly.
My question is....
The phone has apps and settings from the previous user. I want to 'reset' or 'restore' or something like that to remove all settings and content from previous user.
If I go to Settings --> General --> Reset and perform a reset, will my phone still be usable with T-Mobile?
Thank you all. Hope I provided enough info to answer.
you need to restor with custom firmware, because of the 6.15.00 baseband.
then jailbreak and install ultrasnow.
hurry up because 4.3.3 was released and might not be jailbreakable.
if you have SHSH for 4.3.2. or anything earlier, you will be OK.
more...
point665
Oct 26, 07:22 PM
I was there before it opened. Using Leopard now.
TheShinyMac
Aug 13, 06:38 PM
No matter how slow it was rolling its still a big deal, even the slightest bump from another car can derail especially with the condition of the tracks on da tube
more...
aholden12592
Mar 29, 01:16 AM
so im going to italy from california and i was thinking of getting a psp game for the plane rides. these are pretty darn long - 10 hours (i dunno). so for there and back 10 hours after subtracting listening to ipod and socializing. what game would you recommend?
FluJunkie
Apr 28, 03:02 AM
Just so you know there are no military applications that benefit from this.
This is...just not correct.
This is...just not correct.
more...
ajvizzgamer101
May 1, 02:28 PM
CleanMyMac is a pretty good application.
frankieboy
May 6, 07:15 PM
...even with a poultry 5400rpm HD.
I didn't know I had a poultry hard drive. But it explains a lot of the problems I have been having, like the feeling of being hen-pecked by Steve Jobs, and the funny noises I have been hearing from my MBP.
Tonight I am taking the bottom off and see if there are any eggs up there.
:D
I didn't know I had a poultry hard drive. But it explains a lot of the problems I have been having, like the feeling of being hen-pecked by Steve Jobs, and the funny noises I have been hearing from my MBP.
Tonight I am taking the bottom off and see if there are any eggs up there.
:D
sikkinixx
Mar 29, 09:16 AM
Hmmm... Lumines I/II since you generally spend about and hour and half doing one game only to lose, swear, and start over. I dunno how long Syphon Filter is but it's a pretty good action game, as is GTA:VCS. The Sega Genesis collection will keep you busy if you like old school games since Phantasy Star IV alone is a good 10 hours to beat. Ratchet and Clank maybe?
Matty-p
Apr 11, 01:29 PM
Hi,
I have two internet connections here, one via GBit-Ethernet to my Mac Mini and a slower one connected to my WiFi router. I just bought a wireless printer, thus I need to connect the Mini to the WiFi to print.
I think this is not explicitly specified, but which connection will be used to route to the internet? It would be unfortunate to use the WiFi, as it's about 5 times slower.
Can I set the wired connection to be default for all connections, and route only the traffic that really has to go into the WiFi? All that comes to mind at the moment is removing the gateway/router address.
Better ideas?
i take it your taking static routes you could bond them together but thats hard and kinda pointlesss id get rid of the dsl conection stick the gige line into the router bridge that to wifi and wire in the pc/mac to the same router done
I have two internet connections here, one via GBit-Ethernet to my Mac Mini and a slower one connected to my WiFi router. I just bought a wireless printer, thus I need to connect the Mini to the WiFi to print.
I think this is not explicitly specified, but which connection will be used to route to the internet? It would be unfortunate to use the WiFi, as it's about 5 times slower.
Can I set the wired connection to be default for all connections, and route only the traffic that really has to go into the WiFi? All that comes to mind at the moment is removing the gateway/router address.
Better ideas?
i take it your taking static routes you could bond them together but thats hard and kinda pointlesss id get rid of the dsl conection stick the gige line into the router bridge that to wifi and wire in the pc/mac to the same router done
larkost
Apr 26, 10:27 PM
Two notes for you:
1) Why have you not told us what your device is? At least the class of device? This could at least get us to the point of knowing if we should expect the OS to have a generic HID divice driver for this class of device. If there is no generic class driver, then: yes, absolutely you will need to create a device driver (and no, it is not going to be easy).
Unless you ask good questions, you should expect nothing but bad answers.
2) This is not the sort of forum where you should expect to find people who can write drivers. This is a user-level forum. If you need help writing device drivers, then your best bet (short of paying someone who knows how to write device drivers on the Mac) is going to be on Apple's Darwin-drivers list (http://lists.apple.com/mailman/listinfo/darwin-drivers).
1) Why have you not told us what your device is? At least the class of device? This could at least get us to the point of knowing if we should expect the OS to have a generic HID divice driver for this class of device. If there is no generic class driver, then: yes, absolutely you will need to create a device driver (and no, it is not going to be easy).
Unless you ask good questions, you should expect nothing but bad answers.
2) This is not the sort of forum where you should expect to find people who can write drivers. This is a user-level forum. If you need help writing device drivers, then your best bet (short of paying someone who knows how to write device drivers on the Mac) is going to be on Apple's Darwin-drivers list (http://lists.apple.com/mailman/listinfo/darwin-drivers).
Legion93
Apr 23, 02:50 PM
You can eventually control the alien mothership in space with 64GB of RAM.
Blipp
Apr 27, 05:52 PM
FW400 doesn't carry any power so no it's not going to work.
Mikesus
May 1, 02:10 PM
Did you put it in DFU mode?
No comments:
Post a Comment